Send Email
Send SMS
Search


Inconel 601

Providing you the best range of inconel 601 round bar, inconel 601 plate, inconel 601 sheet, inconel 601 wire, inconel flange and inconel 601 nickel alloy with effective & timely delivery.

Inconel 601 Round Bar

REQUEST CALLBACK

Inconel 601 Round Bar
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 2,300 / KilogramGet Latest Price

Product Details:
ShapeRound
TypeRod
Material Grade601 Series
Single Piece Length3 to 6 meter
Density8.1 g/cm cube
Specific Heat461 J/kg K
Electrical Resistivity119 micro ohms cm
Curie Temperature-190 Deg C
Melting Range1320 - 1370 Deg C
Thermal Expansion14.9 (20-300 Deg C) (10-6K)

Inconel 601 nickel-chromium-iron alloy is a general-purpose engineering material for applications that require resistance to heat and corrosion. The outstanding characteristic of Inconel 601 is its resistance to high-temperature oxidation. The alloy also has good resistance to aqueous corrosion, has high mechanical strength, and is readily formed, machined, and welded. The limiting chemical composition of Inconel 601 is listed in Table 1. The composition is a face-centred-cubic solid solution with a high degree of metallurgical stability. The alloy’s nickel base, in conjunction with a substantial chromium content, provides resistance to many corrosive media and high-temperature environments. Oxidation resistance is further enhanced by the aluminium content.

Characteristics:

  • The most important property of Inconel 601 is resistance to oxidation at very high temperatures up to 1250C. Even under severe conditions such as, cyclical heating and cooling. This is possible due to Inconel 601 having a tightly adherent oxide layer which is resistant against spalling. Resistance to carburization is good, also resistant to carbon nitriding conditions. Due to high chromium and some aluminium content, good resistance in oxidizing sulphur bearing atmospheres at elevated temperatures is demonstrated.

Applications:
  • Trays, baskets and fixtures used in various heat treatments such as carburizing and carbon nitriding. Refractory anchors, strand annealing and radiant tubes, high velocity gas burners, wire mesh belts etc. Insulating cans in ammonia reformers and catalyst support grids used in nitric acid production. Thermal reactors in exhaust system of petrol engines. Fabricated combustion chambers. Tube supports and ash trays in the power generation industry.

Chemical Requirements:
 NiCrCMnSiSFe
Max63250.1110.015Bal
Min5821     


Specifications:
Wire 
SheetASTM B168 Din 17750
PlateASTM B168 Din 17750
Fitting 
ForgingDin 17754
Weld WireFM 82
Weld ElectrodeFM 617
Din2.4851

Machining Data:
Carbide tools are suggested for rates better than 50% of Type 304. Machining Type Suggested starting rates are:
Machining Type Suggested starting rates are:
Single Point turning :Roughing - 0.15" depth, 0.015"/rev feed -175 SFM 
 Finishing - 0.025" depth, 0.007"/rev feed - 200 SFM
Drilling :1/4" Dia hole - 0.004"/rev feed - 60 SFM 
 1/2" Dia hole - 0.007"/rev feed - 60 SFM 
 3/4" Dia hole - 0.010"/rev feed - 60 SFM
Reaming :Feed - same as drilling - 100 SFM
Side and Slot Milling :Roughing - 0.25" depth - 0.007"/tooth feed - 125SFM 
 Finishing - 0.050" depth - 0.009"/tooth feed - 140SFM

Yes! I am Interested

Inconel 601 Plate

REQUEST CALLBACK

Inconel 601 Plate
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 2,500 / KilogramGet Latest Price

Product Details:
Surface TreatmentBright Annealed
Material Grade601 Series
Plate TypeInconel Plate
Material of ConstructionNickel-Chromium Alloy
Tensile Strength965 MPa
Work Temperature-1 to 80 deg C
Thickness2 to 10 mm

Our organization is renowned as one of the distinguished manufacturer, wholesaler, trader and supplier of Inconel 601 Plate. Our rod is inspected on well-defined parameters for ensuring a flawless range from our end. Offered plate is available in assorted specifications so as to fulfill the need of customers. The offered plate is widely known for its durability and quality.

Features:
  • Industry approved design
  • Toughness
  • Rust free

Other details:
  • Swagat Steel and Alloys offer wide range of Inconel Sheets and Inconel Plate like inconel 625 sheet, inconel 625 plate, inconel 600 sheet, inconel 600 plate, inconel 601 sheet, inconel 601 plate, inconel welded plate, inconel welded sheets and many more.
Yes! I am Interested

Inconel 601 Sheet

REQUEST CALLBACK

Inconel 601 Sheet
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 2,000 / KilogramGet Latest Price

Product Details:
Tensile Strength500 MPa
Surface TreatmentBright Annealed
Thickness5 to 20 mm
ShapeRectangle
Material Grade601 Series
Work Temperature-1 to 80 deg C
Material of ConstructionNickel-Chromium Alloy

We offer Premium quality Inconel 601 Sheet that finds application in various industries across the globe. Manufactured from quality raw material, these iconel plates & iconel sheets are known for its unique features such as tight tolerance, smooth surface and uniform.

Features:
  • Robust construction
  • Excellent strength
  • Rust proof

Other details:
  • Standard: ASTM / ASME SB.
Yes! I am Interested

Inconel 601 Wire

REQUEST CALLBACK

Inconel 601 Wire
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 2,500 / KilogramGet Latest Price

Product Details:
Material Grade601 Series
Material of ConstructionNickel-Chromium Alloy
Surface TreatmentBright Annealed
Tensile Strength565 MPa
Resistant Temperature1000 deg F
Length10 to 12 meter

We are offering Inconel 601 Wire to our customers. It is made of the good quality raw material having optimum tensile strength.

In what form is Inconel 601 Available at Keshariya Metal Pvt. Ltd.?
  • Sheet
  • Plate
  • Bar
  • Pipe & Tube (welded & seamless)
  • Fittings (i.e. flanges, slip-ons, blinds, weld-necks, lapjoints, long welding necks, socket welds, elbows, tees, stub-ends, returns, caps, crosses, reducers, and pipe nipples)
  • Wire

What are the characteristics of Inconel 601?

  • Outstanding oxidation resistance to 2200° F
Yes! I am Interested

Inconel Flange

REQUEST CALLBACK

Inconel Flange
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 2,500 / KilogramGet Latest Price

Product Details:
Thickness10 to 20 mm
Elongation40%
Material StandardASTM A182
Tensile StrengthPsi - 95000, MPa - 655
Surface FinishPowder Coated
ConnectionMale, Female
Material of ConstructionNickel-Chromium Alloy
Surface TreatmentBright Annealed
Density8.47 g/cm3
Melting Point1413 Deg C (2580 Deg F)
Yield StrengthPsi - 45000, MPa - 310 (0.2%Offset)

We are Manufacturers, Supplier and Exporters of ASTM B564 Inconel 600 Flanges. These products are highly appreciated in the global market for durability, non-magnetic and superior quality. These products conforms to the stringent International standards. These Inconel 600 Flanges are widely used in furnace hardware, gas turbine engine ducting, combustion liners, spray bars, chemical plants, seawater applications, etc. These products are easily available in the market.

Specification:

  • Standard: ASTM, ASME
  • Designation: B 564, SB 564


Standards
Inconel 600
UNSN06600
Werkstoff Nr.2.4816

ASTM B564 Inconel 600 Flanges Chemical Composition:
Inconel 600 
Ni72.0 min
Fe6.0-10.0
Cr14.0-17.0
Cu0.5 max
C0.15 max
Mn1.0 max
S0.015 max
Si0.05 max

Types of ASTM B564 Inconel 600 Flanges:
ASTM B564 Inconel 600 Forged FlangesASTM B564 Inconel 600 High Hub Blinds Flanges
ASTM B564 Inconel 600 Blind FlangesASTM B564 Inconel 600 Spectacle Blinds Flanges
ASTM B564 Inconel 600 Reducing FlangesASTM B564 Inconel 600 Loose Flanges
ASTM B564 Inconel 600 Orifice FlangesASTM B564 Inconel 600 RTJ Flanges
ASTM B564 Inconel 600 Socket Weld FlangesASTM B564 Inconel 600 Screwed Flanges
ASTM B564 Inconel 600 Slip On FlangesASTM B564 Inconel 600 Weld Neck Flanges
ASTM B564 Inconel 600 Flat FlangesASTM B564 Inconel 600 Flange Facing Type & Finish
ASTM B564 Inconel 600 Lapped Joint FlangesASTM B564 Inconel 600 SORF Flanges
ASTM B564 Inconel 600 SWRF FlangesASTM B564 Inconel 600 Groove & Tongue Flanges
ASTM B564 Inconel 600 Square FlangesASTM B564 Inconel 600 Long Neck Weld Flanges
ASTM B564 Inconel 600 Threaded FlangesASTM B564 Inconel 600 Spades Ring Spacers Flanges
ASTM B564 Inconel 600 Weld Neck Flanges Series A or BASTM B564 Inconel 600 Ring Type Joint Flanges
ASTM B564 Inconel 600 WNRF  

Yes! I am Interested

Inconel 601 Nickel Alloy

REQUEST CALLBACK

Inconel 601 Nickel Alloy
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 3,000 / KilogramGet Latest Price

Product Details:
MaterialNickel Alloy
Elongation30 %
Tensile Strength585 0b/MPa
Yield Strength240 (0.2/MPa)
Temperature Ranges1095 Deg C
Material Grade601 Series

The Inconel 601 nickel alloy, a solid solution strengthened alloy with nickel, chrome and iron as principal elements, is a standard engineering material suitable for heat resistant and corrosion resistant applications. Owing to excellent mechanical property and strength as well as great cold and hot processing and welding performance, this nickel-chromium-iron alloy obtains high praise and recognition in various industries. The Inconel alloy 601 features high universality, enabling it to perform perfectly in various applications in which the temperature ranges from very low level to over 1095¿¿¿. In addition, this type of high temperature alloy comes with high strength and oxidation resistance that offer it satisfactory heat resistance and high plasticity under 700¿¿¿. The Inconel 601 nickel alloy is widely used in the heater, distiller and condenser in fatty acid process, rolling furnace wall, furnace components and tray in heat treatment industry, and abietic acid processing equipment in paper pulp manufacturing.

Technical Specification:

UNSW. Nr
N066002.4816


Chemical Compositions:
CompositionNiCrFeCMnSiCuPS
Contentmin72146------
(%)Max17100.1510.50.50.0150.015


Product Forms and Standards of Inconel 600 Nickel Alloy:
BarForgingSheet/StripWirePipe
ASTM B166ASTM B366ASTM B168ASTM B166ASTM B167
    ASTM B163
    ASTM B516
    ASTM B517
Yes! I am Interested

Inconel 601 Fitting

REQUEST CALLBACK

Inconel 601 Fitting
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 2,500 / KilogramGet Latest Price

Product Details:
Tensile Strength965 MPa
Surface TreatmentBright Annealed
Head CodeRound
Material Grade825 Series
Work Temperature-1 to 80 deg C

We offer a wide range of Inconel 601 Fitting that are manufactured from quality tested components. Known for its high quality and durability, these inconel fittings are widely used in various industries across the globe.

Grades:
  • Inconel 800 (UNS No. N08800) 
  • Inconel 825.
Yes! I am Interested

Inconel 625 Nickel Alloy Coil

REQUEST CALLBACK

Inconel 625 Nickel Alloy Coil
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 1,500 / KilogramGet Latest Price

Product Details:
Thickness2 to 6 mm
MaterialNickel Alloy
Material Grade625 Series
Length3 to 38 meter
Width1000 to 2500 mm

Inconel 625 Nickel Alloy Coil: Inconel 625, Chornin 625, Altemp 625, Nickelvac 625, Haynes 625, Nicrofer 6020, W.Nr 2.4856, AWS 012,UNS N06625. Inconel 625 is a high strength material with supreme corrosion and oxidation resistance properties. Therefore, it is recommended for use in the aerospace and chemical processing industries. This super alloy has good mechanical strength and hardness at high temperatures about 2000oF/1093oC to the cryogenic limits. The alloy offers excellent resistance to chloride ion stress corrosion cracking. It is non-magnetic in nature. Due to its toughness, alloy 625 is fit for the degradation of chloride ions. Exceptional corrosion resistance properties of Inconel 625 are due to presence of molybdenum, niobium and solid solution influence of refractory metals. The presence of nickel and chromium elements in Inconel 625 offers the exceptional resistance to oxidizing conditions. Nickel and molybdenum prevent non-oxidizing attack, and Niobium stabilizes the alloy against sensitization while welding. Inconel 625 is also approved for manufacturing pressure vessels at temperature limits -196oC to 450oC or -321of to 840of. Inconel 625 is commonly used in the forms: Inconel 625 wire, Inconel 625 bar and Inconel 625 plate.

Inconel 625 Wire:

  • We are a leading manufacturer of Inconel 625 wire in diameters– 0.03mm to 12 mm. Inconel alloy 625 wires have a major role as filler metal for MIG, TIG, submerged arc and plasma arc welding of alloys such as Inconel 601, Inconel 625, Incoloy 800 and Incoloy 825. Inconel 625 wire is made in flat, square and shaped wires.

Inconel 625 Bar:
  • Inconel Bars and Rods are made available in diameter 3/16 inch – 40 inch and cutting length 1 – 20ft. We have received a unique position in the market for supplying the finest quality Inconel 625 bars with excellent durability and high tolerance. These rods are made by the advanced manufacturing techniques that meet the international standards. Our rods are commonly used in turbocharger rotors, seals, pump motor shafts, fasteners, heat exchangers and steam generators.

Inconel 625 Plate:
  • The applications of Inconel alloy 625 plate include heat shields, chimney liners, reaction vessels, furnace hardware, distillation columns etc. We produce the Inconel plates in different widths up to 1500mm and lengths up to 3000mm.

Technical Specification:
WireSheetRodPipe
ASTM B446, AMS 5666, AMS 5837, ISO 9723, ISO 9724, ISO 9725, VdTüV 499, BS3076NA21, EN 10095, DIN 17752, NiCr20Mo9NbASTM B443, AMS 5599, AMS 5869, ISO 6208, VdTüV 499, BS 3072NA21, EN 10095, DIN 17750DIN 17753, DIN 17754, AWS A5.14 ERNiCrMo-3, AWS A5.11 ENiCrMo-3, DIN 1736 SGASTM B444, ASTM B751, ASTM B829, ASTM B775, ASTM B705, ASTM B704, AMS 5581, ISO 6207, VdTüV 499, BS 3074NA21, DIN 17751


Inconel 625 Structure:
  • Alloy 625 has a face centered cubic lattice structure. The nickel and chromium concentrations enhance the alloy’s mechanical functionality in the solution state in addition of reducing the plasticity.

Inconel 625 Production:
  • Alloy 625 shows good forming and welding properties. It may be hot processed up to 2150oF. Low temperature hot processing should be done to control the grain development. Due to high ductility of 625, it work hardens quickly therefore moderate annealing methods should be followed while the formation of its composite parts.
  • The unrivalled welding characteristics of alloy 625 enable it to join with other metallic materials with unlike compositions, thus Inconel 625 filler metals can be used for welding of different materials.
Yes! I am Interested

Inconel Sheet

REQUEST CALLBACK

Inconel Sheet
Ask for Price

Thanks for Contacting Us.

Product Price :Get Latest Price

Product Details:
ShapeRectangle
Plate TypeThin sheet
Size15NB to 150NB
Surface FinishPowder Coated
Length1500 to 6000 mm
Thickness5 to 15 mm

Jainex Steel & Metal is one of the prime supplier, stockist, exporter and trader of Inconel Sheets and Plates, ASTM / ASME SB 168, ASTM / ASME SB 424, ASTM / ASME SB 443, Inconel 600 Sheets, Inconel 625 Plates, Inconel 718 Plate in mumbai, india. We offer these Inconel Sheets that are available in the variable lengths, grades and sizes. Our products are being used for several applications such as in petroleum, power, paper making, gas metallurgy, chemical, aviation, medical equipment, boiler heat, ship building, exchanger, construction, and more. Our range of Inconel Plates is available in different sizes and grades for to meet the requirement of fabrication, construction industries, heavy engineering, and so on. Ensuring to give high quality of materials, these can further be custom-made in terms of sizes, shapes and thicknesses as per the precise needs of our venerated patrons. We are offering these sheets and plates at market leading prices. Inconel Sheets, Inconel UNS 600/625 Plates, Inconel 718 Perforated Sheet,Incoloy 800/825 Chequered Plate Stockist & Trader in United Kingdom.

Inconel Sheets & Plates Specification:

  • Grade: Inconel 600 (UNS N06600), Inconel 601 (UNS N06601), Inconel 625 (UNS N06625), Incoloy 800 (UNS N08800), Incoloy 800H / HT (UNS N08810), Incoloy 825 (UNS N08825)
  • Standard: ASTM / ASME SB 168, ASTM / ASME SB 424, ASTM / ASME SB 443
  • Size: 15NB to 150NB In
  • Form: Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange) etc

Technical Specifications:
STANDARDUNSWERKSTOFF NR.ENBSGOSTORJISAFNOR
Inconel 600N066002.4816NiCr15FeNA 13????? 28-2,5-1,5??868NCF 600NC15FE11M
Inconel 625N066252.4856NiCr22Mo9NbNA 21??75??????602NCF 625NC22DNB4M
Inconel 718N077182.4668
Incoloy 800N088001.4876X10NiCrAlTi32-20NA 15XH32T??670NCF 800Z8NC32-21
Incoloy 800HN088101.4958 / 1.4876X5NiCrAlTi31-20NA 15(H)XH32T??670NCF 800HZ8NC33-21
Incoloy 800HTN088111.4859 / 1.4876X8NiCrAlTi32-21NA 15(HT)XH32T??670NCF 800HT
Incoloy 825N088252.4858NiCr21MoNA 16XH38BT??703NCF 825NFE30C20DUM

Types of Inconel Sheets & Plates:
  • Inconel Sheets
  • Incoloy Plates
  • Inconel 600 Plates
  • Inconel 625 Sheets
  • Inconel 718 Plates
  • Inconel 825 Sheets & Plates
  • Incoloy 800/800h/800ht Sheets
  • Incoloy Plain Sheet
  • Inconel Shim Sheet
  • Inconel Perforated Sheet
  • Inconel Chequered Plate
Yes! I am Interested

Inconel 600 Round Bar

REQUEST CALLBACK

Inconel 600 Round Bar
Ask for Price

Thanks for Contacting Us.

Product Price :Get Latest Price

Product Details:
Usage/ApplicationConstruction
Single Piece Length6 meter
TypeBar
MaterialInconel
ShapeRound
Temperatures Range2000 Deg F

We have been supplying our clients with Inconel 600 Pipes in various sizes and lengths from time to time. Clients have requirements of these grades for multiple purposes like R&D, Machining, Aerospace Components, Piping& Tubing for Pilot plants etc. Inconel 600 is a nickel-chromium alloy used for applications that require corrosion and high-temperature resistance. This nickel alloy was designed for service temperatures from cryogenic to elevated temperatures in the range of 2000° F. It is non-magnetic, has excellent mechanical properties, and presents the desirable combination of high strength and good weld ability under a wide range of temperatures. The high nickel content in Inconel 600 enables it to retain considerable resistance under reducing conditions, makes it resistant to corrosion by a number of organic and inorganic compounds, gives it excellent resistance to chloride-ion stress-corrosion cracking and also provides excellent resistance to alkaline solutions.


Major Applications:

  • Aerospace.
  • Heat treating industry.
  • Pulp and paper industry.
  • Food processing.
  • Nuclear Engineering.
  • Gas turbine components

Chemical Composition%
Ni + CoCrFeCMnSSiCu
72.0 min14.0-17.06.0-10.0.15 max1.00 max.015 max.50 max.50 max

Mechanical Properties:
Rod & BarCold-Drawn80-10025-5035-5565-85
Rod & BarHot-Finished80-10030-5035-5565-85
Tube & PipeHot-Finished75-10025-5035*55-
Tube & PipeCold-Drawn80-10025-5035-5588 Max

Yes! I am Interested

Inconel 718 Nickel Alloy Coil

REQUEST CALLBACK

Inconel 718 Nickel Alloy Coil
Ask for Price

Thanks for Contacting Us.

Product Price :Get Latest Price

Product Details:
Thickness2 to 6 mm
MaterialNickel Alloy
Material Grade718 Series
Width800 to 1200 mm
Length30 to 40 meter

Inconel 718 is a precipitation hardened Nickel based super alloy that offers outstanding high temperature corrosion resistance properties. Commonly used in aerospace industry , Inconel alloy 718 offers elevated temperature mechanical strength as well as fine ductility up to 704oC/1300oF. It is non-magnetic in nature. Nickel based Super Alloy 718 offers good resistance to oxidation and other types of corrosion in space jet engine and land based gas turbine applications. It is an ideal material for applications that demand excellent resistance to creeping and stress corrosion cracking up to 982oC or 1800oF. Alloy 718 fully prevents pitting and crevice attack in sulfides, chlorides, carbon dioxide and other hostile environments.

Inconel alloy 718 is commonly used in forms- Inconel 718 wire, Inconel 718 bar and Inconel 718 plate.

Inconel 718 Wire:
  • We supply the high grade Inconel 718 wire at the affordable price. The Inconel alloy 718 wires are made available in various diameters ranging 0.03 mm – 12 mm. With the help of extensively experienced group of experts and use of advanced machinery, supplies the best quality Inconel 718 wire to customers. Other Inconel grades available in wire forms are: Inconel 600 wire, Inconel 601 wire, Inconel 625 wire and Inconel X750.

Inconel 718 Bar:
  • Inconel 718 bars can be cut to any size to meet your fabrication and design needs. The Inconel bars are a popular choice among many industries; they are used in hot extrusion tools and components for example casings, bolts, fasteners and equipment parts. Inconel 718 bars and rods are widely used in turbines, rocket fuel components, combustion engine components, and well head parts etc. Other Inconel grades available in bar forms are: Inconel 600 bar, Inconel 601 bar and 625 bar.

Inconel 718 Plate:

  • Inconel 718 plate is developed in specifications – widths up to 1500mm and lengths up to 3000mm. Inconel alloy 718 plates delivered by us are accepted by customers in the various industrial sectors such as paper, sugar, textile, engineering, oil and gas, petrochemical plants and fertilizers, power production and nuclear industry. With experience of decades in supplyingSuper Metal Inconel 718 plate, we offer the high quality, economical and the best performance products. The whole processing is governed by our regularly audited units.

Inconel 718 Applications:

  • Aerospace/aeronautics engineering, rocket motors, thrust reversing devices, marine, chemical treatment units, pressure vessels, pollution control systems and nuclear power production reactions, cryogenic storage containers, high strength bolts and hot extrusion tools, turbine engines, fasteners, fuel and exhaust systems.
  • Inconel grades are fit for use in the production of components that are employed in the severe environments such as turbocharger rotors & seals, motor shafts for electric submersible well pump, steam generators, tubes for heat exchangers, firearm sound suppressor blast baffles and in machine guns, black box recorders in aeroplanes etc.

Inconel 718 Specifications:
WireSheetStripRodPipe
AMS 5914, AMS 5962, NACE MR-01-75, AWS 5.14, ASTM B637, ASME SB637, AMS 5832ASTM B670, ASME SB670AMS 5596, AMS 5597ERNiFeCr-2, AMS 5662, AMS 5663, AMS 5664AMS 5589, AMS 5590

    Yes! I am Interested

    View PDF

    Inconel 825 Nickel Alloy Coil

    REQUEST CALLBACK

    Inconel 825 Nickel Alloy Coil
    Ask for Price

    Thanks for Contacting Us.

    Product Price :Get Latest Price

    Product Details:
    MaterialNickel Alloy
    Thickness2 to 5 mm
    Material Grade825 Series
    Width700 to 1100 mm
    LengthApprox 100 m

    The Jainex Steel & Metal is a well-known brand in the industries of stainless steel manufacturing, and a leading exporter and supplier of Inconel 825 in the country. The company has an illustrious clientele that increases to market in several countries, and is recognized as an innovator in the market when it comes to their products and finishing excellent quality. Jain Steels all-round group of professionals with highly effective background moments and comprehensive experience in manufacturing and managing of Inconel 825. The business also has an worldwide level revenue staff that carefully works with customers all over India and worldwide. Incoloy 825 is a nickel-iron-chromium alloy with additions of molybdenum and copper. This nickel steel alloy’s chemical composition is designed to provide exceptional resistance to many corrosive environments. It is similar to alloy 800 but has improved resistance to aqueous corrosion. It has excellent resistance to both reducing and oxidizing acids, to stress-corrosion cracking, and to localized attack such as pitting and crevice corrosion. Alloy 825 is especially resistant to sulfuric and phosphoric acids. This nickel steel alloy is used for chemical processing, pollution-control equipment, oil and gas well piping, nuclear fuel reprocessing, acid production, and pickling equipment.

    What are the characteristics of Incoloy 825?

    • Excellent resistance to reducing and oxidizing acids.
    • Good resistance to stress-corrosion cracking.
    • Satisfactory resistance to localized attack like pitting and crevice corrosion.
    • Very resistant to sulfuric and phosphoric acids.
    • Good mechanical properties at both room and elevated temperatures up to approximately 1020° F.
    • Permission for pressure-vessel use at wall temperatures up to 800°F.

    Most of the Incoloy family of alloys, Incoloy 825 has a unique chemical composition which includes:
    • Ni 38-46%
    • Fe 22% min
    • Cr 19-23.5%
    • Mo 2.5-3.5%
    • Cu 1.5-3%
    • Mn 1% max
    • Ti 0.6-1.2%


    Alloy 825 has good mechanical properties from cryogenic temperatures to moderately high temperatures. However, exposure to temperatures above 1000° F can result in microstructural changes that significantly lower ductility and impact strength. Alloy 825 should not be used at temperatures where creep-rupture properties are design factors.

    Yes! I am Interested

     
    X


    Explore More Products

    Contact via E-mail
    Contact via SMS
    Jainex Steel & Metal
    Jignesh Jain (Director)
    Shop No. 1, Saboo Siddik Building , Girgaon,
    Mumbai - 400004, Maharashtra, India
    Call Us: 
    Call Response Rate: 68%
    Share Us :
    F G T L



    Home  |   About Us   |  Our Product Range  |  Site Map  |   Contact Us

    © Jainex Steel & Metal. All Rights Reserved (Terms of Use)
    Developed and Managed by IndiaMART InterMESH Limited

    Jainex Steel & Metal