Jainex Steel & Metal

Girgaon, Mumbai, Maharashtra

GST No. 27AACFJ8257C1ZE

Send Email
0804604811372% Response Rate
Search

Home » Our Product Range » Monel 400


Monel 400

Our range of products include monel 400 round bar, monel 400 plates, monel wire, monel 400 sheet, monel rod and monel round bars.

Monel 400 Round Bar

REQUEST CALLBACK

Monel 400 Round Bar
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 800 / KilogramGet Latest Price

Product Brochure
Product Details:
Material Grade400 Series
Single Piece Length6 meter
Surface TreatmentBright Annealed
Tensile Strength765 MPa
ShapeRound
Usage/ApplicationConstruction
Material of ConstructionNickel - Copper Alloy

Monel 400 is a nickel-copper alloy (about 67% Ni – 23% Cu) that is resistant to sea water and steam at high temperatures as well as to salt and caustic solutions. Alloy 400 is a solid solution alloy that can only be hardened by cold working. This nickel alloy exhibits characteristics like good corrosion resistance, good weldability and high strength. A low corrosion rate in rapidly flowing brackish or seawater combined with excellent resistance to stress-corrosion cracking in most freshwaters, and its resistance to a variety of corrosive conditions led to its wide use in marine applications and other non-oxidizing chloride solutions. This nickel alloy is particularly resistant to hydrochloric and hydrofluoric acids when they are de-aerated. As would be expected from its high copper content, alloy 400 is rapidly attacked by nitric acid and ammonia systems. Monel 400 has great mechanical properties at subzero temperatures, can be used in temperatures up to 1000° F, and its melting point is 2370-2460° F. However, alloy 400 is low in strength in the annealed condition so, a variety of tempers may be used to increase the strength.

What are the characteristics of Monel 400?:

  • Resistant to seawater and steam at high temperatures
  • Excellent resistance to rapidly flowing brackish water or seawater
  • Excellent resistance to stress corrosion cracking in most freshwaters
  • Particularly resistant to hydrochloric and hydrofluoric acids when they are de-aerated
  • Offers some resistance to hydrochloric and sulfuric acids at modest temperatures and concentrations, but is seldom the material of choice for these acids
  • Excellent resistance to neutral and alkaline salt
  • Resistance to chloride induced stress corrosion cracking
  • Good mechanical properties from sub-zero temperatures up to 1020° F
  • High resistance to alkalis

Chemical Composition:
CMnSSiNiCuFe
.30 max2.00 max.024 max.50 max63.0 min28.0-34.02.50 max


Corrosion Resistant Monel 400:
  • Alloy 400 is virtually immune to chloride ion stress corrosion cracking in typical environments. Generally, its corrosion resistance is very good in reducing environments, but poor in oxidizing conditions. It is not useful in oxidizing acids, such as nitric acid and nitrous. Nevertheless, it is resistant to most alkalis, salts, waters, food products, organic substances and atmospheric conditions at normal and elevated temperatures. 
  • This nickel alloy is attacked in sulfur-bearing gases above approximately 700° F and molten sulfur attacks the alloy at temperatures over approximately 500° F. Monel 400 offers about the same corrosion resistance as nickel but with higher maximum working pressures and temperatures and at a lower cost due to its superior ability to be machined.


In what applications is Monel 400 used?

  • Marine engineering
  • Chemical and hydrocarbon processing equipment
  • Gasoline and freshwater tanks
  • Crude petroleum stills
  • De-aerating heaters
  • Boiler feed water heaters and other heat exchangers
  • Valves, pumps, shafts, fittings, and fasteners
  • Industrial heat exchangers
  • Chlorinated solvents
  • Crude oil distillation towers
  • Fabrication with Monel 400
Yes! I am Interested

Monel 400 Plates

REQUEST CALLBACK

Monel 400 Plates
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 1,200 / KilogramGet Latest Price

Product Details:
Thickness2 to 10 mm
Grade400 Series
MaterialNickel Alloy
Surface TreatmentBright Annealed
Work Temperature-1 to 80 deg C
Strength550 MPa

Jainex Steel & Metal a remarkable range of Monel 400 Plates for our valued client. The offered products holds several incomparable quality, that make these suitable for many mechanical application. Monel 400 plates are available with us in two different grades such as Monel 400 (UNS No. N04400) and Monel 500 (UNS No. N05500).
Yes! I am Interested

Monel Wire

REQUEST CALLBACK

Monel Wire
  • Monel Wire
  • Monel Wire
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 2,200 / KilogramGet Latest Price

Product Details:
Material Grade400 Series
Material of ConstructionNickel - Copper Alloy
Surface TreatmentBright Annealed
Tensile Strength520 MPa
Work Temperature-1 to 80 deg C

Monel Wire is corrosion resistance allows in the ordinary circumstances to be more superior than the nickel silver, comparing to the pure nickel it bears the corrosion of the reducible medium, it is to be better than to bear the oxidized medium the pure copper the corrosion to the sulfuric acid, the phosphoric acid.
Yes! I am Interested

Monel 400 Sheet

REQUEST CALLBACK

Monel 400 Sheet
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 1,400 / KilogramGet Latest Price

Product Details:
ShapeRectangular
Grade300 Series
Tensile Strength350 MPa
ElongationUpto 30 %
MaterialNickel Alloy
Min. Sheet (Shim) Thickness0.1 mm
Max. Sheet Thickness63 mm
StandardASME SB 443

We are one of the leading stockiest and exporters of Monel 400 Sheet, which are imported by us directly from European and American Mills.
Yes! I am Interested

Monel Rod

REQUEST CALLBACK

Monel Rod
  • Monel Rod
  • Monel Rod
  • Monel Rod
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 800 / KilogramGet Latest Price

Product Details:
Usage/ApplicationConstruction
Tensile Strength350 - 620 MPa
ShapeRound
Surface TreatmentBright Annealed
MaterialNickel Alloy
Single Piece Length6 meter
Grade400 Series
Resistant Temperature1000 deg F

Monel Rod offered by us are highly durable and corrosion resistant, made of Monel 400. In order to meet the demands of different clients, they come in option of varied dimensions, lengths and thickness. Our range of monel round bars are available in different grades.

Other Details:
  • Standard ASTM / ASME SB 164
  • Grades UNS 4400 (MONEL 400 )
Yes! I am Interested

Monel Round Bars

REQUEST CALLBACK

Monel Round Bars
  • Monel Round Bars
  • Monel Round Bars
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 1,200 / KilogramGet Latest Price

Product Details:
MaterialNickel Alloy
Surface TreatmentBright Annealed
ShapeRound
Diameter3.17 mm
StandardASTM / ASME
Length6-12 meter

Monel Round Bars offered by us are highly durable and corrosion resistant, made of Monel400. In order to meet the demands of our domestic and international clients, they come in option of varied dimensions, lengths and thickness. Our range of monel round bars are available in different grades.

Standard:
  • ASTM / ASME SB 164

Grades:
  • Monel 400 (UNS No. N04400)
  • Monel 500 (UNS No. N05500).
Yes! I am Interested

Monel Bar

REQUEST CALLBACK

Monel Bar
  • Monel Bar
  • Monel Bar
  • Monel Bar
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 800 / KilogramGet Latest Price

Product Details:
Single Piece Length6 meter
MaterialNickel Alloy
Usage/ApplicationConstruction
Tensile Strength400 MPa
Surface TreatmentBright Annealed
Grade400 Series
Resistant Temperature1000 deg F

Monel Bar 400 is a nickel - copper alloy that is hardened by cold working only. Monel 400 has low corrosion rate in flowing seawater, therefore it is widely used in marine applications. Monel 400 also has excellent resistance to stress corrosion cracking in most freshwaters. Monel 400 can be used in temperatures up to 1000 ºF. The alloy has great mechanical properties at subzero temperatures.
Yes! I am Interested

Monel Plates

REQUEST CALLBACK

Monel Plates
  • Monel Plates
  • Monel Plates
Get Best Quote

Thanks for Contacting Us.

Approx. Rs 2,400 / KilogramGet Latest Price

Product Details:
Melting Point1350 Deg C (2460 Deg F)
Density8.8 g/cm3
Min. Thickness5 mm
Max. Thickness150 mm
MaterialNickel Alloy
Resistant Temperature1000 deg F
Tensile Strength80,000-Psi, 550-MPa
Yield StrengthPsi-35,000, MPa-240 (0.2%Offset)
Elongation40%

ASTM B127 Monel Alloy 400 Sheet, Plate Suppliers In India. Monel 400 Shim Sheet, Monel 400 Cold Rolled Sheets, Monel Alloy 400 Hot Rolled Plates,Exporter. Jainex Steel & Metal offers a widespread range of Alloy 400 Sheets Plates and Coils, where it is the responsibility of our group members to inspect these products for any form of finishing defect in that way achieving utmost serenity of the clienteles. Monel 400 Strip Coils is used for hydrocarbon and chemical processing equipment, marine engineering, shafts, fittings, valves, pumps, fasteners, and heat exchangers. For the reason that of its excellent corrosion resistance, Monel 400 Slim Coils is used in chemical plant machinery. Monel 400 Coils shows first-rate corrosion resistance and soaring strength in a variety of alkaline and acidic atmospheres and it's particularly appropriate for reducing environments. The machinability of Monel 400 Plates (UNS N04400) is hard as it works-toughens throughout machining. Meanwhile, these Monel 400 Circles are also being offered in different sizes and shapes to our customers.

Monel 400 Sheets, Plates Specifications:

  • Monel 400 Coil, Slim Coils Chemical Composition
  • ASTM B127 Monel Sheets, Plates Applications Industry
  • Monel 400 Sheet, Plate, Coil
  • Monel 400 Plates, Rings
  • Monel 400 Sheets, Plates Material Testing
  • Monel 400 Plates, Coils Test Certificate
  • ASTM SB 127 Monel 400 Sheet, Plate, Coil Documentation
  • Cities We Supply
  • Countries We Export
  • Other Types OfMonel 400 Sheet, Plate

Monel 400 Sheets, Plates Specifications:
  • Specifications: ASTM B 127 / ASME SB 127
  • Hardness: Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.
  • Finish: Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
  • Specialize: Shim Sheet, Perforated Sheet, B. Q. Profile
  • Form: Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring (Flange)
  • Grade: Monel 400 – UNS N04400

Specifications:
STANDARD  WERKSTOFF NR. UNSAFNORGOSTJISBSEN
Monel 400 2.436 N04400NU-30M????? 28-2,5-1,5NW 4400NA 13NiCu30Fe
Grade Ni FeCMnSiCuAlS
Alloy 40063.0 min 1.0 - 2.50.3 max2.0 max0.5 max28.0 - 34.00.50 max0.02 max

Applications Industry – Monel 400 Sheets, Plates:
  • Chemical Equipment
  • Sea Water Equipment
  • Heat Exchangers
  • Condensers
  • Pulp and Paper Industry
  • Power Generation
  • Petrochemicals
  • Gas Processing
  • Specialty Chemicals
  • Pharmaceuticals
    Yes! I am Interested

    Monel 400 Rods

    REQUEST CALLBACK

    Monel 400 Rods
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 800 / KilogramGet Latest Price

    Product Details:
    Single Piece Length6 meter
    Usage/ApplicationConstruction
    MaterialNickel Alloy
    Surface TreatmentBright Annealed
    Tensile Strength620 MPa
    Grade400 Series
    Min. Diameter3.17 mm
    Max. Diameter350 mm

    We Jainex Steel & Metal offer Monel 400 Rods in different forms including pre-cut and custom forged. The specifications of these rods comply with International standards. Our range of Monel pipe can be availed in different thickness and sizes a per application requirements.

    Grades:
    • Monel 400 (UNS No. N04400)
    Yes! I am Interested

    Monel Flange

    REQUEST CALLBACK

    Monel Flange
    • Monel Flange
    • Monel Flange
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 800 / KilogramGet Latest Price

    Product Details:
    Size5-10 inch
    TypeFlange
    MaterialStainless Steel
    ShapeRound
    No of Hole4

    We are Manufacturers, Supplier and Exporters of Monel 400 Flanges. These Monel 400 flanges are used with stub end or daft which is butt welded to the pipe with the flange loose behind it. It implies the stub end or daft always makes the face. These flanges are designed to comply with International standards and specifications. Monel 400 offers about the same corrosion resistance as nickel but with higher maximum working pressures and temperatures and at a lower cost due to its superior ability to be machined.

    Specification:

    Standards :ASTM / ASME, BS, DIN
    Class :150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS, ASA 150#, ASA 300# DIN ND 6,10,16,25,40 Etc.
    Range :15 NB to 300 NB
    Grade :Monel 400 (UNS No. N04400) Flanges
    Monel 400 Flanges: B 564 / SB 564

    Monel 400 Flanges Chemical Composition:
    Monel 400 
    Ni63.0 min
    Fe1.0-2.5
    Cu28.0-34.0
    C0.03 max
    Mn2.0 max
    Al0.50 max
    S0.02 max
    Si05 max

    Mechanical & Physical Properties:
    Temp° FTensile (psi).2% Yield (psi)Elongation in 2” %
    70110,60054,90044
    100089,00035,60049
    120083,00035,40054
    140067,00034,40053
    160045,00028,20058

    Types Of Monel 400 Flanges:
    Monel 400 Forged FlangesMonel 400 High Hub Blinds Flanges
    Monel 400 Blind FlangesMonel 400 Spectacle Blinds Flanges
    Monel 400 Reducing FlangesMonel 400 Loose Flanges
    Monel 400 Orifice FlangesMonel 400 RTJ Flanges
    Monel 400 Socket Weld FlangesMonel 400 Screwed Flanges
    Monel 400 Slip On FlangesMonel 400 Weld Neck Flanges
    Monel 400 Flat FlangesMonel 400 Flange Facing Type & Finish
    Monel 400 Lapped Joint FlangesMonel 400 SORF Flanges
    Monel 400 SWRF FlangesMonel 400 Groove & Tongue Flanges
    Monel 400 Square FlangesMonel 400 Long Neck Weld Flanges
    Monel 400 Threaded FlangesMonel 400 Spades Ring Spacers Flanges
    Monel 400 Weld Neck Flanges Series A or BMonel 400 Ring Type Joint Flanges
    Monel 400 WNRF Flanges 

    Yes! I am Interested

    Monel 400 Tube

    REQUEST CALLBACK

    Monel 400 Tube
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 1,400 / KilogramGet Latest Price

    Product Details:
    ShapeRound
    Thickness0.6 to 20 mm
    Material Grade400 Series
    Material of ConstructionNickel - Copper Alloy
    Surface TreatmentBright Annealed
    Out Diameter100 mm

    We are one of the leading stockiest and exporters of Monel 400 Tube, which are imported by us directly from european and american mills.
    Yes! I am Interested

    Monel K500 Alloy Coil

    REQUEST CALLBACK

    Monel K500 Alloy Coil
    • Monel K500 Alloy Coil
    • Monel K500 Alloy Coil
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 2,800 / KilogramGet Latest Price

    Product Details:
    Thickness2 to 10 mm
    MaterialMonel
    Material GradeK500 Series
    Width1200 to 1800 mm

    In addition to the popular nickel-copper alloy Monel k 400, Jainex Steel & Metal also has many Monel K500 products in stock. Monel K500 is an age-hardened version of Monel 400, meaning it has greater strength and resistance to corrosives, especially sea water. Monel K500 is ideal for use in machinery that is either submerged in the ocean or regularly exposed to sea water. Off-shore oil rigs, for instance, use Monel K500 for valve trimming and pump shafts. Jainex Steel & Metalhas a steel service center and a forging company, both of which offer Monel K500 products. The steel service center is a lot like a lumber yard, in that clients can purchase pre-cut alloys in different shapes, sizes and specifications. Monel K500 is available in pre-cut seamless pipe, hollow bar, strip, flat bar, and more. The forging company also custom forges Monel K500 in contour rings, discs, shafts, open dies, and other forms. Although they have secured their place as leaders in the specialty steel supply market, Jainex Steel & Metalhas a lot more to offer than just a huge inventory of steel products. They also provide a wealth of metallurgical information on their website. The Information Resources section of the site has become an online library for people searching for everything from definitions of metallurgical terms to industry news to a ferrous/non-ferrous materials overview. Monel K500 is a precipitation-hardenable nickel-copper alloy that combines the excellent corrosion resistance characteristic of Monel 400 with the added advantage of greater strength and hardness. These amplified properties, strength and hardness, are obtained by adding aluminum and titanium to the nickel-copper base and by a thermal processing used to effect precipitation, typically called age hardening or aging. When in the age-hardened condition, Monel K-500 has a greater tendency toward stress-corrosion cracking in some environments than Monel 400.

    What are the characteristics of Monel K500 Alloy?

    • Corrosion resistance in an extensive range of marine and chemical environments. From pure water to non-oxidizing mineral acids, salts and alkalis.
    • Excellent resistance to high velocity sea water
    • Resistant to a sour-gas environment
    • Excellent mechanical properties from sub-zero temperatures up to about 480C
    • Non-magnetic alloy
    Yes! I am Interested

    Monel K500 Round Bar

    REQUEST CALLBACK

    Monel K500 Round Bar
    • Monel K500 Round Bar
    • Monel K500 Round Bar
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 1,850 / KilogramGet Latest Price

    Product Details:
    MaterialMonel
    ShapeRound
    Length6 to 12 meter
    UsageConstruction

    Jainex Steel & Metal Monel K-500 is a unique nickel-copper superalloy and offers many of the benefits of Monel 400, but with strength and hardness. These improvements are due to two main factors:

    • The addition of aluminum and titanium to an already robust nickel-copper base adds strength and hardness.
    • Material strength and hardness is further enhanced through age hardening.


    Though used for a wide variety of applications, Monel alloy K-500 is specifically popular in a number of fields including:

    • Chemical Industry (valves and pumps).
    • Paper Production (doctor blades and scrapers).
    • Oil and Gas (pump shafts, drill collars and instruments, impellers, and valves.
    • Electronic components and sensors.

    Monel K-500 is composed of the following:
    • 63% Nickel (plus Cobalt).
    • 1.5% Manganese.
    • 2% Iron.
    • Copper 27-33%
    • Copper 27-33%
    • Titanium 0.35-0.85%


    Monel K-500 is also known for its ease of fabrication compared to other superalloys, and the fact that it is essentially nonmagnetic even at low temperatures.

    It is available in most popular forms including:

    • Rod and Bar (hot-finished and cold-drawn).
    • Sheet (cold rolled).
    • Strip (cold rolled, annealed, spring tempered).
    • Tube and Pipe, Seamless (cold-drawn, annealed and annealed and aged, as-drawn, as-drawn and aged).
    • Plate (Hot Finished)
    • Wire, Cold Drawn (annealed, annealed and aged, spring temper, spring temper aged)


    We stock and sell Nickel Alloy K-500 and Monel® K-500 in Pipe, tube, sheet, strip, plate, round bar, flat bar, forging stock, hexagon and wire.

    Chemical Composition of Nickel Alloy K-500 and Monel® K-500

    Al2.30 - 3.15
    C.25 max
    Cu27.0 - 33.0
    Fe2.0 max
    Mn1.5 max
    Ni63.0 max
    Ti.35 - .85
    S.01 max
    Si.5 max

    Nickel Alloy K-500 and Monel® K-500 Standards:
    • Plate, Sheet, and Strip
    • BS3072NA18.
    • BS3073NA18
    • QQ-N-286
    • DIN 17750
    • ISO 6208
    • Bar, Rod, Wire, and Forgings
    • BS3075NA18
    • BS3076NA18
    • ASTM B 865
    • DIN 17752
    • DIN 17753
    • DIN 17754
    • QQ-N-286
    • SAE AMS 4676
    • ASME Code Case 1192
    • ISO 9723
    • ISO 9724
    • ISO 9725
    • Pipe and Tube
    • BS3074NA18
    • DIN 17751
    Yes! I am Interested

    Monel K400 Alloy Strips

    REQUEST CALLBACK

    Monel K400 Alloy Strips
    Get Best Quote

    Thanks for Contacting Us.

    Approx. Rs 1,750 / KilogramGet Latest Price

    Product Details:
    Surface FinishPowder Coated
    TemperaturesUp to 1020 Deg F
    Length8 to 12 m
    Thickness2 to 6 mm
    Material GradeK400 Series

    Monel K400 is just one of the specialty steels available at Jainex Steel & Metal. Like most of the products they offer, Monel k400 is available in a variety of shapes and sizes, both pre-cut and custom forged. And if for some reason you don’t see the particular form or grade of Monelk400 that you are looking for, contact Jainex Steel & Metal Solution Team and they will special order it for you whenever possible. All Metals & Forge supplies Monelk 400 to a variety of companies in the marine, oil drilling, and chemical processing industries. Valued for its strength and durability in the face of natural and chemical corrosives, Monelk 400 is also cheaper than nickel and easier to work with. All Metals & Forge carries Monel k 400 in pipe, plate, sheet, wire, and many other forms. While many specialty steel suppliers simply offer pre-cut alloys in a limited amount of forms and sizes, Jainex Steel &Metal provides an extensive product listing for their clients. Their Solution Team strives to combine responsive service, competitive pricing, and fast delivery on even the most detailed orders. Gone are the days of the adversarial sales rep/client relationship; at Jainex Steel &Metal , the Solution Team is there to help.

    What are the characteristics of Monel K400 Alloy?

    • Resistant to seawater and steam at high temperatures.
    • Excellent resistance to rapidly flowing brackish water or seawater.
    • Excellent resistance to stress corrosion cracking in most freshwaters.
    • Particularly resistant to hydrochloric and hydrofluoric acids when they are de-aerated.
    • Offers some resistance to hydrochloric and sulfuric acids at modest temperatures and concentrations, but is seldom the material of choice for these acids.
    • Excellent resistance to neutral and alkaline salt.
    • Resistance to chloride induced stress corrosion cracking.
    • Good mechanical properties from sub-zero temperatures up to 1020° F.
    • High resistance to alkalis.
    Yes! I am Interested

     
    X


    Explore More Products

    Contact via E-mail
    Contact via SMS
    Jignesh Jain (Director)
    Jainex Steel & Metal
    Shop No. 1, Saboo Siddik Building, Girgaon
    Mumbai - 400004, Maharashtra, India
    Call Us: 
    Call Response Rate: 72%
    Share Us :



    Home  |   About Us   |  Our Product Range  |  Site Map  |   Contact Us

    © Jainex Steel & Metal. All Rights Reserved (Terms of Use)
    Developed and Managed by IndiaMART InterMESH Limited

    Jainex Steel & Metal